UVP GelDoc-Ite Imager - Manual (Page 3)

GelDoc-It
e
Imager 3
System Components
Refer to the packing slip and pictured components for specific parts and components included with the
system.
Specifications
Power Requirements: 100/115V, 50/60Hz; 3.1 Amps at 120 Volts
230V, 50/60Hz; 1.55 Amps at 230 Volts
Mains supply voltage fluctuations are not to exceed 10 percent of the
nominal supply voltage
Pollution Degree: 2
Installation Category: II
Altitude: Up to 2000m
Ambient Temperature: 5°C to 40°C
Humidity: Maximum relative humidity of 80% for temperatures up to 31°C,
decreasing linearly to 50% maximum relative humidity at 40°C
Minimum Computer Requirements:
Processor: Pentium class, 1.6 GHz or higher
RAM: 1 GB (2GB Preferred)
Display: 1024 x 768
Operating System: Microsoft Windows XP Service Pack 2 or Newer (32-bit or 64-bit)
Internet Browser: Microsoft Internet Explorer 6.0 or later
Computer USB Ports: Computer must come equipped with a minimum of one USB port;
additional peripherals (mouse, keyboard, printer, etc.) may require
additional USB ports.
White Light Power Switch
Darkroom Door Lock Knob
Filter Tray (located beneath
the camera) with Ethidium
Bromide Filter
UV-Blocking Gel Viewer
Window
Integrated UV
Transilluminator
FluorCam 220 Camera and
Zoom Lens
Side Access Doors
UV Power Switch
UV Selector Knob
(on 2UV™ and 3UV™
models) or Intensity Selector
Knob (Single UV Models)