UVP SI-950 Ultraviolet Incubator - Manual (Page 2)

UV Incubator Page 1
Introduction
This single chamber unit is designed for the variable-temperature incubation and humidification
envelopment of microbiology organisms, biology assays and any protocol requiring heat incubation
in the range of ambient +10°C to 68°C.
The Incubator is constructed with built-in overhead shortwave 254nm UV tubes for decontamination
of the chamber between experiments.
Safety Information
The UV Incubator is designed with function, reliability and safety in mind. It is the user’s
responsibility to install the unit in conformance with local electrical codes.
Specifications
Temperature
Range Ambient to 68
O
C
Sensor LM345 Integrated Temperature Sensor
Controller PI
Setpoint Digital
Display Digital LED
Accuracy +0.5
O
C
Uniformity +0.1
O
C at 37
O
C
Relative Humidity ~ 80%
Unit Heat Load
Typical operation Incubation
Heating Element 1250 Watts, 4,265,1777 BTUXH
Dimensions
Exterior W x H x D 17.5 x 17 x 14” (445 x 432 x 356mm)
Interior W x H x D 14 x 10.7 x 10.9” (356 x 272 x 277mm)
Shelves (2 standard)
Dimensions (W x D) 13.3 x 8.5” (338 x 216mm)
Construction Formed stainless steel
Surface area 113.05 in
2
Construction
Interior volume cu ft 0.95 cubic feet (26.9 liters)
Interior Stainless steel
Exterior Aluminum powder coated
Door Polycarbonate
Electrical
115V 60 Hz
230V 50 Hz
100V 50/60 Hz