Bushnell ONIX 110 - Manual (Page 21)

21
1. On the map page, press the Menu button to
display the Menu options.
2. Use the navigation keys to select the Nearest POI
option and press OK
(Fig. 18) .
3. Select A Type first, using the navigation keys to
select the type and then press OK
(Fig. 19) .
4. Select the Distance and Select A Name, you can
use the navigation keys to highlight your selection
and press OK
(Fig. 20) . Then use the up/down keys
to move to what you want to select and press OK.
Finally you will see the object on the map page.
Using Waypoints
Read the following sections to learn how to utilize the
waypoint function.
NOTE: The ONIX 110 can save up to 1000 waypoints.
Creating Waypoints
To create a new waypoint using the map:
1. On the map page, position the cursor at the
location where you want to set a waypoint.
2. Press the Menu button to display the menu
options.
3. Use the navigation keys to select the My
Waypoints option and press OK
(Fig. 21) .
4. The waypoint screen is displayed. Highlight
the name column and press OK to display the
alphanumeric keyboard and enter a name for the
new waypoint.
5. Press the Menu button and select New from the
drop down box
(Fig. 22) . Press OK to confirm. A
waypoint of the chosen location is created and its
location information is displayed.
6. You can specify the name and add a comment for
the waypoint you just created. Use the navigation
Fig. 18
Fig. 19
Fig. 20
Fig. 21