Bushnell ONIX 110 - Manual (Page 23)

23
Deleting Waypoints
To delete an unused waypoint:
1. On the map page, press the Menu button to
display the menu options.
2. Use the navigation keys to select the My
Waypoints option and press OK.
3. A list of all waypoints is displayed on the screen.
The active waypoint which is currently used for
navigation is denoted by an asterisk (*) sign next
to it.
4. Use the navigation keys to highlight the waypoint
you want to delete and press the Menu button to
display the OSD menu.
5. Select Delete
(Fig. 25) to delete only the active
waypoint (or Delete All (Fig. 26) to delete all
waypoints) from the drop down box and press OK
to confirm.
6. A message prompts you to confirm the action.
Press OK to delete or the ESC button to cancel.
Using Routes
Read this section to learn how to create a route
manually using the previously created waypoints.
Creating a Route
To create a route using the waypoints previously
created:
1. In Advanced mode, press the Menu button to
display the menu options.
2. Use the navigation keys to select the My Routes
option and press OK
(Fig. 27) .
3. A list of routes will be displayed on screen. Press
the Menu button and use the navigation keys to
select New
(Fig. 28) .
4. A new route is created and its information is
displayed on screen. Use the navigation keys to
Fig. 25
Fig. 26
Fig. 27
Fig. 28