Rs-232 / rs485 modbus tcp/rtu converter – Weidmuller WI-MOD-945-E: 900Mhz Wireless Ethernet & Device Server v2.16 User Manual

Page 45

Advertising
background image

Weidmuller Wireless Ethernet Modem & Device Server WI-MOD-945-E User Manual

Page 45

www.weidmuller.com

Rev 2.136

Character
Timeout

Enter the maximum delay (in msec) between received serial characters before
packet is sent via network.

Packet Size

The number of received bytes that will be buffered before a packet is sent via the
network.

Multicast
Group Port

Enter the UDP port number that all members of the group will use (i.e. all group
members should use the same port number).

Multicast
Group IP
Address

Enter a valid Multicast IP Address identifying the group (i.e. all group members
should use the same Multicast Group IP Address). Valid Multicast IP Addresses
are in the range 224.0.1.0 to 238.255.255.255.

Serial Gateway
Mode

Modbus - Allows a serial Modbus Client (Master) to connect with a single
Ethernet Modbus TCP Server (Slave)

Character
Timeout

Enter the maximum delay (in msec) between received serial characters before
packet is sent via network.

Packet Size

The number of received bytes that will be buffered before a packet is sent via the
network.

Modbus Server
Port

Enter the TCP port number of the remote server (i.e. the remote port to
automatically connect to).

Modbus Server
IP Address

Enter the IP Address of the remote server (i.e. the remote IP Address to
automatically connect to).

RS-232 / RS485 Modbus TCP/RTU Converter

Modbus
Server TCP
Port

Port number used for the Modbus TCP

– Standard port is 502.

Pauses
Between
Requests

Enter the delay between serial request retries in milliseconds

Response
Timeout

Enter the serial response timeout in milliseconds

– a serial retry will be sent if a

response is not received within this timeout.

Connection
Timeout

Enter the TCP connection timeout in seconds

– if no Modbus/TCP data is received

within this timeout then the TCP connection will be dropped. Set this field to zero for
no timeout.

Maximum
Request
Retries

Enter the maximum number of request retries performed serially.

Maximum
Connections

Enter the maximum number of simultaneous TCP connections to the server
allowed.

Advertising