Connections – Western Digital WD TV Live/Live Plus Media Player User Manual User Manual
Page 11
WD TV Live/Live Plus HD Media Players
User Manual
FEATURES AND FUNCTIONS – 7
Connections
Note: This device does not support USB hubs.
Item
Component
Description
1
USB port 1
Supports connection of removable storage devices, portable
media players, digital cameras with USB connectors, and
USB wireless adapters.
2
Reset switch
Press for one second to reset to factory defaults (see “Reset
to Factory Defaults” on page 140). Press and hold 10 seconds
to toggle between NTSC and PAL. Use a fine-tipped stylus or
the unfolded end of a paperclip to press the reset switch.
3
Power jack
Connects the power cable
4
USB port 2
The same function as USB port 1
5
HDMI port
Connects to your TV’s HDMI port (HDMI cable sold separately)
6
S/PDIF (optical)
audio port
Connects to your AV receiver (S/PDIF cable sold separately)
7
Ethernet port
Supports LAN connection for wired Internet access.
8
Composite jack
Connect to your TV’s analog video and audio jacks
9
Component jack
Connect to your TV’s component (YPbPr) terminals.
1
2
3
4
5
6
7
8
9