Western Digital WD TV Live/Live Plus Media Player User Manual - Manual (Page 144)

WD TV Live/Live Plus HD Media Players
User Manual
SETTINGS AND ADVANCED FEATURES – 140
Display File Size
Set this menu to On to display the file size information in the media browser screen.
User Interface Transition Effect
Use this menu to set the visual transition between screens in the media player’s user
interface (None or Fade in and fade out).
Additional Encoding Support
Press / to select an encoding support for a secondary language, then press
ENTER. This prevents garbled characters in file names and subtitles defined in the
selected language.
Auto Play
Select the type of media (music or video) that plays automatically when a USB
device is connected to the media player. The media files should be located in the
USB device’s root directory for Auto Play to function.
Reset to Factory Defaults
Use this menu to restore all media player system preferences and playback settings
to their default factory values. Reset to factory defaults corrects performance
problems caused by a failed firmware upgrade or faulty configuration settings.
Important: If you specified a static IP address (or any other non-standard
configuration), the media player will no longer appear on the network after
the reset. Also, be sure to reset the media player to factory defaults and
reset all online service accounts before returning or otherwise transferring
the device to purge your internet services personal account information,
network shares passwords, and wireless network passwords.
To perform a system reset:
1. Press / to select Reset to factory defaults, then press ENTER.
2. Press to select OK on the system reset prompt, then press ENTER.