Western Digital WD TV Live/Live Plus Media Player User Manual - Manual (Page 32)

WD TV Live/Live Plus HD Media Players
User Manual
NETWORK SETUP – 28
9. Press / to select a security protocol, then press ENTER.
10. Use the navigation buttons to key in the passcode for the access point,
select Submit, then press ENTER.
11. Use the navigation buttons to select Automatic (obtains IP address
automatically from the router) or Manual (input static IP address manually), then
press ENTER. If you selected Manual, follow steps 7-10 under “Ethernet
Network (Wired) Setup” on page 23. When finished, proceed to step 12 below.
12. Once the network is successfully set up, the following screen appears. Press
ENTER to display the Settings screen.
After establishing a network connection, you can:
„ Use the Internet services integrated into your media player to access
streaming media. Go to the next chapter for more information on these
services.
„ Transfer files between the media player and your computer (PC or Mac).
Procedures for copying and moving files between the media player and your
computer is described in “File Management” on page 135.