Western Digital WD TV Play Media Player User Manual - Manual (Page 127)

WD TV Play Media Player
User Manual
SETUP AND ADVANCED FEATURES – 122
Note: The HDMI CEC function only works with HDMI CEC-compatible devices. Not all operations of
each HDMI device can be controlled with a single remote control. Depending on the specifications of
your HDMI-CEC compatible device, some or all functions listed above may not work even if the device
is HDMI-CEC compatible.
Dolby Dynamic Range Control (DRC) Setting
Use this menu to set the dynamic range control, which reduces or increases sound
levels. This setting can be useful when, for example, you want to watch a movie
without hearing wide volume swings between loud and quiet sounds. DRC thus
enables reduced peak volume levels without loss of overall sound quality. Default
setting is On. Options are Off, Enable DRC for All Files, and Enable DRC for
Compatible Files.
Screen Size Calibration
Use this menu to correct any issues with overscan (the display is cropped in the TV
screen). To correct any overscan problems, calibrate the display by reducing the
display size by up to 30%. The calibration settings are in 5% increments.
Note: Screen size calibration only affects the user interface. It does not affect video scaling.