Western Digital WD TV Play Media Player User Manual - Manual (Page 135)

WD TV Play Media Player
User Manual
SETUP AND ADVANCED FEATURES – 130
Device Reset
Use this menu to perform device reset options:
Reset All Settings Back to Factory Default – restores all media player system
preferences and playback settings to their default factory values. This may correct
problems caused by a failed firmware upgrade or faulty configuration settings.
Reset All Settings Except Apps Accounts – restores all media player system
preferences and playback settings to their default factory values with the exception
of your apps personal account information.
Important: If you specified a static IP address (or any other non-standard
configuration), the media player will no longer appear on the network after
the reset. Also, be sure to reset the media player to factory defaults and
reset all online service accounts before returning or otherwise transferring
the device to purge your internet services personal account information,
network shares passwords, and wireless network passwords.
To perform a device reset:
1. Press / to select Device Reset, then press OK.
2. Press / to select a device reset option, then press OK.
3. Select OK in the confirmation screen, then press OK.
Device Restart
Select OK then press OK to restart the media player.
Device Registration
To register your WD product using the Setup menu:
1. Make sure your media player has an active network connection.
See “Finding Your Content - My Storage” on page 24 for instructions on how to
set up a network connection.
2. From the My Favorites home screen, navigate all the way to the left to select
Settings, then press OK.
3. Press / to select System, then press OK.