WORX WU381 18V 2.6 Ah Lithium Ion SDS Plus Cordless Rotary Hammer Drill - Manual (Page 11)

11
ON/OFF SwiTcH (See Fig. c)
Depress the On/Off switch(5) to start and release it to stop your tool.
— ON/OFF SwiTcH wiTH vARiABlE SPEED cONTROl
Depress the On/Off switch to start and release it to stop your tool.
This tool has a variable speed switch(5) that delivers higher speeds
with increased trigger pressure - speed is controlled by varying the
pressure applied to the switch.
SwiTcH lOcK (See Fig. c)
The switch trigger can be locked in the OFF position. This helps to
reduce the possibility of accidental starting when not in use. To lock
the switch trigger, place the direction of rotation control in the center
position.
FORwARD AND REvERSE ROTATiON cONTROl (See Fig. c)
With the drill pointing away from you, push the forward/reverse-lever
to the left “
“for forward rotation. Push the forward/reverse-lever
to the right for reverse rotation “ “.
warning: Never change the direction of rotation while the tool is
rotating, wait until it has stopped.
FUNcTiON MODE SElEcTiON (See Fig. D)
The operation of the gearbox for each application is set with the
function mode selection switch (4). To change between functions,
depress the unlocking button (10) and rotate the selector to the
desired operating mode.
4
5
6
7
10
A B
C D