WORX WU381 18V 2.6 Ah Lithium Ion SDS Plus Cordless Rotary Hammer Drill - Manual (Page 13)

13
prolonged time will reduce the battery pack working time. This can be
corrected after several charge and discharge operations by charging &
working with your drill. Heavy working conditions such as large screws
into hard wood will use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery pack below 0oC and
above 30
o C as this will affect performance.
Maintenance
Remove the battery pack from the tool before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
Environmental protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.
Disposal of an exhausted
battery pack
To preserve natural resources, please recycle or dispose of the
battery pack properly. This battery pack contains Li-Ion batteries.
Consult your local waste authority for information regarding
available recycling and/or disposal options. Discharge your battery
pack by operating your drill, then remove the battery pack from the
drill housing and cover the battery pack connections with heavy-duty
adhesive tape to prevent short circuit and energy discharge. Do not
attempt to open or remove any of the components.