Maintenance, Clean water supply hose filter, Exchange hoses – Yamato Scientific WG221S Water Purifiers User Manual
Page 47
Advertising
-45-
Maintenance
Clean Water Supply Hose Filter
(1) Close the faucet and remove the water supply
hose after turning off the unit breaker.
(2) Remove
② plug from ① ring with turning.
(3) Clean
⑦ filter in the plug by tap water.
(4) Push the filter by flat end of a pencil etc. from
the hole at the side of sleeve in case of terrible
stoppage.
(5) Brush the filter.
(6) Assemble the filter in the reverse procedure.
Exchange Hoses
●
Use the specified hose for exchange.
Advertising
This manual is related to the following products: