Rockwell Automation 20P PowerFlex DC Drive - Frame A AC CurrentTransducers for Drives w/Bus Bars - Manual (Page 6)

6 PowerFlex® DC Drive - Frame A AC Current Transducers for Drives with Bus Bars
Step 3: Remove the
Control EMI Shield and
Control Board 1. Carefully disconnect the cables from connectors XFCD, XA and XR on
the Control board.
2. Remove all appropriate I/O and control wiring including:
– digital and analog I/O plug-in terminal blocks on the Control board
– analog tachometer terminal block on the Control board
– encoder terminal block on the Control board
– cable shields that are grounded to the Control EMI shield.
– I/O terminal blocks on the I/O Expansion board
– I/O terminal blocks on the 115V AC to 24V DC I/O Converter board
=
Disconnect
cables XFCD,
XA, and XR
Disconnect I/O
and control
terminal blocks.
Note: Control board
shown with
Communication Adapter
and optional boards
removed.