Publication 20p-in066a-en-p, Related documentation – Rockwell Automation 20P PowerFlex DC Drive - Frame D Snubber Resistors User Manual
Page 10
Publication 20P-IN066A-EN-P - January 2011
Copyright © 2011 Rockwell Automation. All rights reserved. Printed in USA.
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions
1S7A70
Step 7: Close the Control
Panel, Install the Protective
Cover and Document the
Change
1. Close the control panel, replace the DPI cable (if necessary), and install
the protective cover in the reverse order of removal as detailed in Step 2:
Remove the Protective Cover and Open the Control Panel on page 2
.
2. Record the installation of the new snubber resistors and date of
installation on the Field Installed Option label on the side of the drive
(as shown below).
Related Documentation
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature
.
For . . .
Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives
User Manual - PowerFlex Digital DC Drives 20P-UM001…