Rockwell Automation 20P PowerFlex DC Drive - Frame D Snubber Resistors User Manual
Page 7
Advertising
7
Important: Prior to removing the SCR assemblies, ensure that the area around
the drive is clear of equipment. Only lift the assemblies using the
handles provided.
8. Loosen the six hexalobular screws that secure the SCR module leg assembly
to the back wall of the drive chassis.
9. Using the two handles, lift the SCR assembly up and off the mounting
screws and lift the assembly up and forward so that the output terminals
clear the holes in the bottom of the drive frame.
10. Repeat steps 8 and 9 above for each SCR assembly.
Loosen screws
Loosen screws
Loosen screws
Loosen screws
Loosen screws
Loosen screws
Lifting handles
Lifting handles
Advertising