Rockwell Automation 150-E SMC Elevator Users Manual - Manual (Page 8)

8 Rockwell Automation Publication 150-UM009D-EN-P - February 2011
Chapter 1 Introduction
Starter Selection For 6 or 12 Lead Wye-Delta Wound Motors
The following table lists the catalog numbers that can be used with 6 or 12 lead
Wye-Delta motors. For proper operation, the connection should be verified
during installation. Sample connection diagrams for INSIDE-THE-DELTA
connected motors are included in the Installation and Wiring section found later
in this manual.
Table 1 - Cat. Nos. For Use with 6- or 12-Lead Wye-Delta Motors
➊ Motor FLA must fall within the specified range to operate correctly.
For 3- or 9-Lead Closed Delta-Type Motors
The following table lists the catalog numbers that can be used with 3- or 9-lead
closed delta type motors. For proper operation, the connection should be verified
during installation. Sample connection diagrams for LINE connected motors are
included in the Installation and Wiring section found later in this manual.
Table 2 - Cat. Nos. For Use with 6 or 12 Lead Closed Delta-Type Motors
➊
Motor FLA must fall within the specified range to operate correctly.
Hp at Nominal Ratings
Overload Range ➊
Control Voltage Cat. Nos.
200V 240V 480V 575V 120V 230V
10 10 20 30 10.9…32.9 150-E32NCE-FC 150-E32NCA-FC
15 15 30 40 17…51 150-E51NCE-FC 150-E51NCA-FC
20 20 40 60 21.3…64 150-E64NCE-FC 150-E64NCA-FC
20 25 50 60 24.7…74 150-E74NCE-FC 150-E74NCA-FC
30 40 75 100 34.7…104 150-E104NCE-FC 150-E104NCA-FC
40 50 100 150 49…147 150-E147NCE-FC 150-E147NCA-FC
75 75 150 200 59…234 150-E234NCE-FC 150-E234NCA-FC
Hp at Nominal Ratings
Overload Range ➊
Control Voltage Cat. Nos.
200V 240V 480V 575V 120V 230V
5 5 10 15 6.3…19 150-E32NCE-FC 150-E32NCA-FC
7.5 10 20 25 10…30 150-E51NCE-FC 150-E51NCA-FC
10 10 25 30 12.3…37 150-E64NCE-FC 150-E64NCA-FC
10 15 30 40 14.3…43 150-E74NCE-FC 150-E74NCA-FC
15 20 40 50 20…60 150-E104NCE-FC 150-E104NCA-FC
25 30 60 75 28.3…85 150-E147NCE-FC 150-E147NCA-FC
40 50 100 125 34…135 150-E234NCE-FC 150-E234NCA-FC