Rockwell Automation 160 SSC Remote Keypad User Manual - Manual (Page 5)

Chapter
1
Introduction
The Remote Keypad can be used to change drive parameter values, monitor
operating conditions, and control drive operation.
Important: The four-character Remote Keypad display requires an extra
keystroke in order to display a current parameter value. See feature
4 on page 1-5 and step 4 on page 3-1.
Remote Keypad Figure 1.1
Drive Compatibility
The Remote Keypad is compatible with Bulletin 160 SSC™ Variable Speed Series
C drives using firmware version FRN 7.01 or higher.
Related Publications
Prior to using the Remote Keypad, please familiarize yourself with the following
publications for complete parameter and fault descriptions and detailed
information about hazards associated with AC drives.
• 160 SSC™ Variable Speed Drive (Series C) User Manual ,
Publication 0160-5.15
• 160 SSC™ Variable Speed Drive Quick Reference Series C,
Publication 0160-5.16