Rockwell Automation 1441-DYN25-Z Dynamix 2500 Data Collector User Manual
Page 58
Advertising
58
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Chapter 2
Configuring the Dynamic 2500 Data Collector
The Data Collection screen appears.
2.
Press 0 (Shift) to display the Config function.
The Config function should remain on the screen for approximately three
seconds after releasing the 0 key.
3.
Press F4 (Config) to display the data collection options.
Advertising
This manual is related to the following products: