Rockwell Automation 1441-DYN25-MFRF Frequency Response Function Extension Module for the Dynamix 2500 - Manual (Page 8)

8 Rockwell Automation Publication 1441-UM003A-EN-P - May 2011
Chapter 1 Installing Optional Extension Modules
Install an Extension
Module Follow these instructions to install an extension module.
1. Open the base cover at the bottom of the Dynamix 2500 data collector.
2. Place the extension module Secure Digital (SD) card contact side-up into
the unit until it is firmly seated in place.
3. Close the base cover.
4. Apply power to the data collector.
5. From the Main Menu, select Setup Utility and press Enter.
6. Press 0 (Shift) to display the second set of functions.
The Extension Manager function remains on the screen for about
3 seconds after releasing 0 (Shift).
7. Press F1 (Extn Mgr).
Extension Manager