Rockwell Automation 1492 1771-to-1756 I/O Swing-arm Conversion System User Manual
Page 8
Advertising
Figure 6d
Figure 6c
II. Conversion Steps
b) Refer to Figure 6c, Find the conversion module compatible end of the cable. Each cable has a slide latch which mechanically locks the cable
into the conversion module, Ensure the cable is latched.
c) Refer the Figure 6d. Gently guide the conversion module end of the cable into the conversion module, and firmly press the two components
together and lock the cable slide latch.
Slide Latch
(8)
10000060110 (Version 00)
Advertising