Rockwell Automation 1492-AIFM8-3_RAIFM8-3 Analog Interface Modules User Manual
Page 5
(5)
Pinout
Brochage
Anschlußbelegung
Disposizione dei piedini
Esquema de pins
I/O Wiring Data
1492-AIFM8-3
1492-RAIFM8-3
B1
3
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
2
1
14
15
16
17
18
12
13
A9
A10
A11
A12
A13
A14
A15
A16
25
24
23
22
20
21
A1
A2
A3
A4
A5
A6
A7
A8
4
6
8
10
19
SH
Wiring information for your I/O module, AIFM module and cable (e.g. wiring diagram and pinouts)are available online at www.rockwellautomation.com/en/e-tools.
To obtain information follow this procedure.
1) In the Catalog Number BOX at the above online site type in the catalog number of the IFM, AIFM, etc. module you are using and click on Submit.
2) At the next screen displayed, click on the Modify key (lower left of screen).
3) Click on the areas that indicate NO SELECTION and enter your specific configuration information (e.g. I/O platform, I/O MODULE, ETC.). NOTE: To obtain the
wiring diagram, you must select th Pre-Wired Cable Connector selection.
4) Configure your 1492 cable by filing in the NO SELECTION areas.
5) Click on the ACCEPT key for the configured 1492 cable. At the next screen click on ACCEPT for the 1492 module.
6) At the next screen (Configuration Results) displays the results of your specific configuration. The "supplementary Documents" column contains I/O wiring information
for the configuration (e.g. I/O Wiring Diagrams).
PN-104504
DIR 40063-326 (Version 11)
NOTICE