Rockwell Automation 1609 UPS Management Software User Manual - Manual (Page 20)

18 Rockwell Automation Publication 1609-UM007A-EN-P - January 2013
Bulletin 1609 UPS Management Software User Manual
Devices
Notification Users -- Pager
List To let 1609 UPS Management Software notify you via pager you must setup the
modem device. If you select the TAPI (Windows Telephony Application
Programming Interface) then Windows will handle the modem device,
otherwise, 1609 UPS Management Software will control the modem device
directly (AT Command).
Program will set the modem to notify all via the pager numbers, which are listed
in the pager list. You can input your pager number for your own notification
purposes. For example: 060123456 is your pager number, each ',' tells modem to
delay 2 seconds, delay time is for setting waiting period for the response signal,
before proceeding to transmit to the displayed number 119. 119 will appear in
your pager LCD.
To trigger the pager notification you must enable the Pager Action in the Action
dialog box.
COM Port: The communication port COM1, ...COM4.
Baud Rate: Set the data transmitting speed.
Initialize String: The string, which is sent to the modem before paging is
attempted.
Dial Prefix: The string, which is added to the beginning of each of the
Pager Number before they are sent to the modem.
Using TAPI: Lets Windows handle the modem device.
Add: Add a new pager number.
Modify: Modify the selected pager number.
Delete: Delete the selected pager number.
Notification Users -- e-mail You can also e-mail users through SMTP when power events occur.
To trigger the e-mail notification you must enable the e-mail Action in the Action
dialog box.
Add: Add a new user.
Modify: Modify the selected user name.
Delete: Delete the selected user.