Rockwell Automation 1609-S350ES Uninterruptible Power Supply - 350VA User Manual
Page 3
41063-285-01 (1)
990-2955 05/2006
Installation
Read the safety instruction sheet before installing the UPS.
Unpacking
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents for: the UPS, serial cable and APC
®
PowerChute
®
software.
Environmental Specifications
Do not operate the UPS where there is excessive dust or in temperature and humidity outside the specified limits.
Mounting the UPS
This unit is designed to mount on the back panel of an enclosure. An optional Din rail mounting kit, 1609-SDK1, is also available.
If mounted in an enclosure, use six screws appropriate for the weight of the unit and the mounting surface material.
Connecting the Battery
Remove the Battery Door, Connect the Battery, and Reinstall the Battery Door.