Power-up instruction – Rockwell Automation 1414-IPZxxxxx_CPZxxxxx_CPDxxxxx Differential Air Pressure Transmitter User Manual
Page 7
Differential Air-pressure Transmitter 7
Publication 1414-IN011B-EN-P - July 2010
Power Supply
Power-up Instruction
Follow these steps before using the transmitter.
1. Before turning on the power, verify all wiring to ensure that it complies with the wiring
diagrams and verify that the output signal type is correctly selected on the jumpers.
2. Review the specifications to ensure the power supply is correct and that the pressure is
within the correct range.
3. Inspect the internal pressure tubing that connects the sensor to the external ports to
ensure that the tubing did not get kinked during shipping or installation.
PWR COM OUT
RANGE
ZERO
CURR
EN
T
VOL
TA
GE
OUTPUT SIGNAL
10V
5V
LCD
LOW
HIGH
CONTROLLER
IN
COM
24V AC
120V AC
0…5V DC Output with 24V AC Power Supply
4…20 mA (two-wire)
PWR COM OUT
RANGE
ZERO
CURR
EN
T
VOL
TA
GE
OUTPUT SIGNAL
10V
5V
LCD
LOW
HIGH
POWER SUPPLY
24V DC
( - )
( + )
CONTROLLER
IN
COM
4…20 mA Output with 24V DC External Power Supply