Rockwell Automation 1329I CE Filter Option Kit - Manual

Instruction Sheet
1329I Integrated Drive/Motor
CE Filter Option Kit
CE filter options are designed to be used with the 1329I Integrated Drive/Motor.
The main function of the CE filter is to reduce the radio frequency conducted
emissions into the main supply lines and ground wiring. This publication
provides the steps needed to install the filter.
Important: Declarations of Conformity to the European Union Directives
are available for Allen-Bradley AC drive products. Please
contact your Allen-Bradley Sales Representative.
Refer to the page listed below for installation instructions.
• Internal Mount Option – See page 2.
• NEMA 12 Enclosed Option – See page 5.
ATTENTION: The CE filter connects between the incoming AC
supply line and the drive input terminals. The filter must be
installed by qualified personnel familiar with the drive and
associated machinery. Failure to comply may result in personal
injury and/or equipment damage.
ATTENTION: An incorrectly applied or installed CE filter can
result in component damage or a reduction in product life. Wiring
or application errors, such as incorrect wiring layout, incorrect or
inadequate AC supply or excessive ambient temperatures may
result in malfunction of the system.