Installation – Rockwell Automation 1397 Pulse Encoder Interface Installation Inst. User Manual
Page 6
Advertising
1397 Pulse Encoder Interface Card
6
1397-5.13 June, 1997
Retaining
Screw
Retaining
Screw
Retaining
Screw
Retaining
Screw
Carrier Shield
Power
Supply
Board
J17
Connector
J17
Carrier Shield
Installation
(continued)
❐
3
To remove the carrier shield, remove the (4) retaining screws
and unplug the ground wire at the Power Supply Board.
Advertising