Rockwell Automation 1608S I-Sense User Manual - Manual (Page 18)

Rockwell Automation Publication 1608S-UM001A-EN-P - July 2013 18
Operation, Maintenance and Troubleshooting Chapter 4
• Carefully disconnect the battery plug and pull the battery holder straight
out.
• Replace or check batteries. Use only the same type rechargeable battery:
Nickel-metal-hydride (NiMH), 1.2V AA-size, rated 2000mAh to
3000mAh. Do not use any other battery type.
• Important: be sure that battery polarity matches the markings on the
battery holder (+ and -)
• Replace battery holder straight into the unit. Carefully reconnect he
battery plug.
• Be certain leads are not pinched. Replace cover. Tighten screws.
Waste batteries should be separated from the normal municipal waste stream and
collected separately for local recycling