Back cover – Rockwell Automation 1403-BA Powermonitor II Lithium Battery Installation Instructions User Manual
Page 8
Publication 1403-IN006A-EN-P - February 2009
PN-49077
Supersedes Publication 41053-060-01(B) - February 1996
Copyright © 2009 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Powermonitor II, Allen-Bradley and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
6. Reinstall the closure plate on the top face of the Master Module.
7. Send a command to reset the real time clock and clear the battery usage
counter using the Display Module or the Communication Card.
ATTENTION
Risk of fire or burns. Do not recharge, disassemble, heat above 100 °C (212 °F), or
incinerate. Keep battery out of reach of children and in original package until ready to
use. Dispose of used batteries promptly. Never put batteries in mouth. If swallowed,
contact your physician or local poison control center.
ATTENTION
Replace battery with Allen-Bradley Cat. No. 1403-BA only. Use of another battery may
present risk of fire or explosion.