Connecting 1394-dclms together, Figure 5 locating the power plug, Figure 6 removing the power plug – Rockwell Automation 1394-DCLM DC Link Module User Manual
Page 4
Publication 1394-5.11 December 1999
4
Installing Your 1394 DC Link Module
Figure 5
Locating the Power Plug
If you are linking two systems together, install the second 1394-
DCLM in the second system. The total wire distance between 1394-
DCLMs cannot exceed 3 meters (9.84 ft).
Connecting 1394-DCLMs Together
You can connect two 1394 systems together using either a 1.5 meter
(4.92 ft) cable (catalog number 1394-CPDC-0015) or 3 meter
(9.84 ft) cable (catalog number 1394-CPDC-0030).
To connect 1394-DCLMs together:
1. Remove the power plug from the front underside of each 1394-
DCLM using a phillips screwdriver.
Figure 6
Removing the Power Plug
Power Plug
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
Power Plug
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
Screws