Rockwell Automation 1395 ControlNet Communication Board User Manual
Page 50
Advertising
3–36
Configuration & PLC Interfacing
Publication 1395–5.37– March, 1999
Block Number – This is an integer number used to specify which
block of trend data (from the above specified trend buffer) the Drive is
to supply. The definition of each block is as follows:
Block #0 – 0, Trend setup parameters
Block #1 – 1, Trend data samples 0 through 33
Block #2 – 2, Trend data samples 34 through 66
Block #3 – 3, Trend data samples 67 through 99
Advertising