Entretien, Calendrier d’entretien, Maintenance – Briggs & Stratton 203721GS User Manual

Page 14: Maintenance schedule

Advertising
background image

14

BRIGGSandSTRATTON.COM

Maintenance

Maintenance Schedule

Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.

1

Inspect anually, replace as necessary.

2

Service more often under dirty or dusty conditions.

General Recommendations

To ensure efficient operation and longer life of the air
compressor, prepare and follow a routine maintenance
schedule. The routine described in this section is intended for
an air compressor used under normal daily working conditions.
If necessary, modify the schedule to suit the conditions under
which you use your compressor. Modifications will depend
upon hours of operation and working environment. Operating
air compressors in extremely dirty or hostile environments will
require more frequent maintenance checks.

NOTE: See Features and Controls and Operation for control
locations.
Regular maintenance will improve the performance and
extend the life of the air compressor. See any authorized
Briggs & Stratton dealer for service.
The air compressors warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain air
compressor as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your air compressor.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.

NOTE: Once a year you should clean or replace the spark
plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.

Emissions Control

Maintenance, replacement, or repair of the emissions
control devices and systems may be performed by any
non-road engine repair establishment or individual.
However, to obtain ”no charge” emissions control service,
the work must be performed by a factory authorized dealer.
See the Emissions Warranty.

First 5 Hours

• Change engine oil

First 100 Hours

• Change pump oil

Every 8 Hours or Daily

• Clean unit

• Inspect safety valve

• Inspect fittings/valves

• Check pump oil

• Check engine oil level

Every 25 Hours or Yearly

• Service engine air cleaner

2

Every 50 Hours or Yearly

• Check and service pump air filter

• Change engine oil

• Service spark arrester

Every 100 Hours or Yearly

• Inspect safety labels

1

• Service spark plug

• Clean cooling system

2

Every 300 Hours

• Change pump oil

Advertising