Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start - Manual (Page 17)

Getting Started with ProcessLogix R500.1 17
Publication 1757-QS500A-EN-P - October 2002
Creating a PID Loop
The next step is to create a Control Module to control a process. In this example, we create a
PID loop.
Creating a Control Module
To create the Control Module:
1. Click File⇒New⇒Control Module. You see a blank window for the Control Module
in the center of your screen.
2. Rename the Control Module:
a. Double-click anywhere in the CM Window. You see the Parameter window.
b. In the Name field, enter FIC102.
3. Select the Server Displays tab and enter the following parameters:
4. Click OK to close the Parameter window.
5. Save your changes by clicking File⇒Save. Notice that the new Control Module name
appears in the Project Tab.
6. Close the Control Module FIC102.
in this field: enter (not case-sensitive):
Point Detail Page sysdtlpida.dsp
Group Detail Page sysgrppida.dsp