Rockwell Automation 1734-OV2E_4E_8E POINT I/O Protected Sink Output Module Installation Instructions - Manual (Page 23)

POINT I/O Protected Sink Output Module 23
Publication 1734-IN585C-EN-E - December 2005
Specifications
1734-OV2E/C, 1734-OV4E/C, and 1734-OV8E/C
Protected Sink Output Modules
Specification Value
Number of Outputs 1734-OV2E - 2 (1 group of 2) non-isolated, sinking
1734-OV4E - 4 (1 group of 4) non-isolated, sinking
1734-OV8E - 8 (1 group of 8) non-isolated, sinking
ON-State Voltage Range 10V dc min
24V dc nom
28.8V dc max
ON-State Voltage Drop 0.7V dc max (at 28.8V dc, 55 °C, full load condition)
ON-State Current 1.0 mA min per channel
1.0 A max per channel (electronically protected)
OFF-State Voltage 28.8V dc max
OFF-State Leakage 0.5 mA max
Output Signal Delay (1)
OFF to ON
ON to OFF 0.1 ms max
0.1 ms max
Output Current Rating 1734-OV2E - 1.0 A per output, 2.0 A max per module
1734-OV4E and 1734-OV8E - 1.0 A per output, not to exceed
3.0 A max per module
Surge Current 2 A for 10 ms, repeatable every 3 s
Indicators (field side
indication, logic driven) 1734-OV2E
2 yellow output status
2 red output fault
2 green/red module/network status
1734-OV4E
4 yellow output status
4 red output fault
2 green/red module/network status
1734-OV8E
8 yellow output status
8 red output fault
2 green/red module/network status
Keyswitch Position 1