Wire the modules – Rockwell Automation 1734-SSI POINT I/O Synchronous Serial Interface Encoder Module Installation Instructions User Manual
Page 11
Advertising
POINT I/O Synchronous Serial Interface Absolute Encoder Module 11
Publication 1734-IN581D-EN-E - January 2014
Wire the Modules
To wire the modules, refer to the diagrams and tables.
POINT I/O Synchronous Serial Interface Absolute Encoder Module
WARNING: If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
Module
Status
Network
Status
1734
SSI
NODE:
RUN
UP
I1
DOWN
COMP
43123
Module status
Network status
Down status
Comp status
Run status
Up status
D+
V+
Shield
C+
D-
V-
I1
C-
D = Data
I1 = Digital Sourcing Input 1
C = Clock
V = SSI Sensor
Advertising