Additional resources, About the module – Rockwell Automation 1734-SSI POINT I/O Synchronous Serial Interface Encoder Module Installation Instructions User Manual
Page 6
6 POINT I/O Synchronous Serial Interface Absolute Encoder Module
Publication 1734-IN581D-EN-E - January 2014
Additional Resources
Refer to POINT™ I/O 5V and 24V Encoder/Counter Modules User Manual,
publication
, as needed.
If you would like a manual, you can:
•
download a free electronic version from the internet:
•
purchase a printed manual by contacting your local Allen-Bradley distributor or
Rockwell Automation representative.
About the Module
You can use this Series C module with DeviceNet and PROFIBUS adapters. If you are
using RSLogix 5000 software, version 11 or higher, you can also use the Series C modules
with ControlNet and Ethernet adapters.
This module collects serial data from industrial absolute-position encoding sensors that
use standard SSI protocol. You insert the module into a POINT I/O terminal base that
provides common power, communication, and wiring connections for the SSI sensors.
Use this diagram to identify the external features of the module.