Rockwell Automation 1734-ACNR Point I/O ControlNet Adapter Installation Instructions - Manual (Page 10)

10
Publication 1734-IN582B-EN-P - February 2005
Wire the ControlNet Adapter
WARNING
If you connect or disconnect the communications
cable with power applied to this module or any
device on the network, an electrical arc can occur.
This could cause an explosion in hazardous
location installations.
WARNING
If you connect or disconnect wiring while the
field-side power is on, an electrical arc can occur.
This could cause an explosion in hazardous
location installations. Be sure that power is
removed or the area is nonhazardous before
proceeding.