Bakers Pride DRG-40 - Manual (Page 26)

Gas Rotisserie Oven Maintenance
24
Troubleshooting
Problem Cause Possible Solution
Unit will not turn on. Power to unit is not on. Problem
with building power panel, circuit
breaker or fuse. Check circuit breaker or fuses at building
power panel.
Power cord may not be plugged
into outlet. Plug cord into outlet.
Blown fuse. Contact an authorized BKI service agent
for corrective action.
Not rotating. Motor circuit breaker tripped. Press the reset button. If problem persists,
contact an authorized BKI service agent
for corrective action.
ROTOR switch may not be
activated. Make sure the ROTOR switch is on.
Doors may not be closed. Close the doors.
Rotor switch not
functioning. Defective switch. Contact an authorized BKI service agent
for corrective action.
Oven does not heat at all. Doors may not be closed. Close the doors.
Gas supply valve may be closed. Open gas supply valve.
ROTOR switch may not be
activated. Make sure the ROTOR switch is on.
HEAT switch may not be on. Turn HEAT switch on.
Improper program settings. Check program settings.
Gas valve may be in safety lockout
mode. Turn off HEAT switch for one minute, then
turn back on.
Burner does not ignite. Contact an authorized BKI service agent
for corrective action.
Hi Limit switch may be tripped. Contact an authorized BKI service agent
for corrective action.
Lower burner is not
working. Doors may not be closed. Close the doors.
Gas supply valve may be closed. Open gas supply valve.
HEAT and LOWER FLAME switch
may not be on. Turn HEAT switch and LOWER FLAME
switch on.
Gas valve may be in safety lockout
mode. Turn off HEAT switch to allow gas fumes
to clear, then turn back on.
Burner does not ignite. Contact an authorized BKI service agent
for corrective action.
Lights are not working. Light switch may not be on. Turn the LIGHTS switch on. If problem
persists contact an authorized BKI service
agent for corrective action.
Controller displays “PROB”. Thermocouple connection is loose
or thermocouple defective. Contact an authorized BKI service agent
for corrective action.
Water Fill is not working Water supply to oven may be off. Turn on water supply.
Defective oven water system. Contact an authorized BKI service agent
for corrective action.