Rockwell Automation 1738-IE4CM12 ArmorPoint 4-Channel 24V dc Analog Input Modules, Series A - Manual (Page 4)

4 ArmorPoint 4-Channel 24V dc Analog Input Module, Series A
Publication 1738-IN024C-EN-P - March 2010
About the Module
The ArmorPoint I/O family consists of modular I/O modules. The sealed
IP67 housing of these modules requires no enclosure. (Note that
environmental requirements other than IP67 may require an additional
appropriate housing.) I/O connectors are sealed M12 style. The mounting
base ships with the module. The 1738-IE4CM12 module is shown below.
ATTENTION
Make sure all connectors and caps are securely tightened to properly seal the
connections against leaks and maintain IP enclosure type requirements.
ATTENTION
To comply with the CE Low Voltage Directive (LVD), all connected I/O must be
powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
MOD
NET
0
1
1738-IE4CM12/A
Analog Current In
0
1
2
3
2 3
Connector M12-A
LED Indicators
44367
1738-IE4CM12
Connector M12-B
Connector M12-C
Connector M12-D