Install the module – Rockwell Automation 1738-IE4CM12 ArmorPoint 4-Channel 24V dc Analog Input Modules, Series A User Manual
Page 6
Advertising
6 ArmorPoint 4-Channel 24V dc Analog Input Module, Series A
Publication
1738-IN024C-EN-P - March 2010
Mounting base
Install the Module
Follow the instructions to install the analog input module.
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number 3 aligns with the notch in the base.
2. Position the module vertically above the mounting base.
The module bridges two bases.
Ground lug connection
Latching mechanism
Set the keyswitch
position to 3, for the
1738 analog input
modules
43675
Advertising