Rockwell Automation 1790-TXXXX Digital Expansion Terminal Block Compact Block LDX I/O - Manual (Page 5)

5
Publication 1790-IN005B-EN-P - April 2003
Installing CompactBlock LDX I/O
Follow these steps to install the expansion block:
1. Mount the block.
2. Connect an expansion block to a base block.
3. Wire the expansion blocks.
These steps are explained in detail in the following sections.
When used in a Class I, Division 2,
hazardous location, this equipment must be
mounted in a suitable enclosure with the
proper wiring method that complies with
the governing electrical codes.
WARNING
!
WARNING
!