Rockwell Automation 1734-OE4C Installation Instructions User Manual
Page 10
Advertising
10 POINT I/O 4 Channel Analog Current Output Module
Publication
1734-IN034B-EN-P - November 2010
1734-TOP Base
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number required for the type of module being
installed aligns with the notch in the base.
2. Make certain the DIN rail locking screw is in the horizontal position.
You cannot insert the module if the locking mechanism is unlocked.
3. Insert the module straight down into the mounting base and press to
secure. The module will lock into place.
Turn the keyswitch to align
the number with the notch.
Notch position 1 is shown.
Be sure the DIN-rail
locking screw is in the
horizontal position.
44228
44325
Advertising