Brocade Communications Systems ServerIron ADX 12.4.00 - Manual (Page 137)

ServerIron ADX Global Server Load Balancing Guide 125
53-1002437-01
Host-level policies for site selection
1
GSLB-ServerIronADX(config)# gslb-host-policy abc

GSLB-ServerIronADX(config-gslb-host-policy-abc)# weighted-site
Syntax: [no] weighted-site
Use the no form of the command to disable the weighted IP metric for the host-level policy.
Applying a host-level policy to a GSLB host
To apply a configured host-level policy to a GSLB host, enter commands such as the following:
GSLB-ServerIronADX(config)# gslb dns zone gslb1.com

GSLB-ServerIronADX(config-gslb-dns-gslb1.com)# host-info www http

GSLB-ServerIronADX(config-gslb-dns-gslb1.com)# host-info www gslb-policy abc
Syntax: host-info <host> gslb-policy <policy-name>
NOTE
By default, the GSLB ServerIron ADX applies the global GSLB policy to a host.
Displaying host-level policy information
Displaying a host-level policy
To view a particular host-level GSLB policy, enter a command such as the following:
GSLB-ServerIronADX# show gslb policy host-policy-name abc
GSLB POLICY: abc
Default metric order: ENABLE
Metric processing order:
1-Server health check
2-Remote ServerIron's session capacity threshold
3-Round trip time between remote ServerIron and client
4-Geographic location
5-Site connection load
6-Remote ServerIron's available session capacity
7-VIP's active bindings
8-Server flashback speed
9-Remote ServerIron's preference value
10-Local least response selection
DNS active-only: ENABLE DNS best-only: ENABLE
Session availability tolerance: 20%
Round trip time tolerance: 20
Flashback appl-level delay tolerance: 30%, TCP-level delay tolerance: 50%
Connection load limit: 4
Weighted Site Metric: DISABLE weighted IP Metric: DISABLE
Active Bindings Metric: ENABLE
Syntax: show gslb policy host-policy-name <policy-name>