Brocade Communications Systems ServerIron ADX 12.4.00 - Manual (Page 189)

ServerIron ADX Global Server Load Balancing Guide 177
53-1002437-01
Displaying GSLB information
1
Displaying the user-configured GSLB policy
To display the user-configured GSLB policy, enter the following command.
ServerIronADX(config)# show gslb policy

Default metric order: ENABLE 
Metric processing order:

1-Server health check

2-Remote ServerIronADX's session capacity threshold

3-Round trip time between remote ServerIronADX and client

4-Geographic location

5-Remote ServerIronADX's available session capacity

6-Server flashback speed

7-Least response selection


DNS active-only: DISABLE DNS best-only: DISABLE DNS override: DISABLE

Modify DNS response TTL: ENABLE

DNS TTL: 10 (sec), DNS check interval: 30 (sec)

Remote ServerIronADX status update period: 30 (sec)

Session capacity threshold: 90%, session capacity tolerance: 10%

Round trip time tolerance: 10%, round trip time explore percentage: 5%

Round trip time cache prefix: 20, round trip time cache interval: 120 (sec)

Flashback appl-level delay tolerance: 10%, TCP-level delay tolerance: 10%
Syntax: show gslb policy
In this example, the default order of the policy metrics is in effect. Metrics that are disabled by
default (such as the administrative preference) are not listed.
In the following example, the order has been changed, two of the metrics have been disabled, and
the administrative preference has been enabled.
Flashback appl-level delay
tolerance Indicates the percentage of difference that can exist between application level
FlashBack response times for two sites, without the ServerIron ADX preferring
one site over the other based on this metric.
TCP-level delay tolerance Indicates the percentage of difference that can exist between Layer 4
FlashBack response times for two sites, without the ServerIron ADX preferring
one site over the other based on this metric.
TABLE 13 GSLB policy information (Continued)
This field... Displays...