Rockwell Automation 2361 Bridge Fan and Capacitor Replacement - Manual (Page 4)

Publication 2361-5.16 April 1999
4 Bridge Fan and Capacitor Replacement (for 1250 and 1650A 1395 DC Drives)
Replacing the Capacitor Unit With One Capacitor
1. Disconnect the coupling for the power leads to the fan capacitor.
2. Loosen the screws which secure the capacitor bracket. Remove the
capacitor.
3. Secure the new capacitor into the unit.
4. Connect the leads of new wire harness to the capacitor as shown in
Figure 2.
5. Connect the coupling.
Figure 2
Unit with One Capacitor
B lack
B lue
Label should
face outward
Mounting bracket
Coupling