Rockwell Automation 6177R-Mxxx Industrial Non-display Computers - Manual (Page 10)

10 Industrial Non-display Computers
Rockwell Automation Publication 6177R-IN001G-EN-P - July 2013
1450R Computers (catalog number 6177R-R4)
Mount the 650R Non-display Computer in a Panel
You can mount the non-display computer on a wall, panel, or 19-inch rack. The computer
attaches to the panel by using the four screw slots in the front plate. Use M5 or #10 screws (or
larger). Screws are not included.
ATTENTION: Remove all electrical power from the panel before making the cutout. Make sure the
area around the panel cutout is clear. Do not allow metal cuttings to enter components that are
already installed in the panel. Failure to follow these warnings may result in personal injury or
damage to the panel components.
431 (16.97)
465 (18.31)
485 (19.11)
17
6
(6
.9
3)