Install the computer, Mounting hardware, Mounting clearances – Rockwell Automation 6177R-Mxxx Industrial Non-display Computers User Manual
Page 8
8 Industrial Non-display Computers
Rockwell Automation Publication 6177R-IN001G-EN-P - July 2013
Install the Computer
The computers support various mounting options:
•
Machine mount
•
Rack mount
Mounting Hardware
The table lists the hardware required for each type of installation.
Mounting Clearances
When selecting an installation site for the computers, be sure to allow adequate clearance on the
sides and rear of the computer for adequate ventilation and cable connections. Sufficient air flow
throughout the system unit is required to maintain proper cooling. Clearance should be enough
to allow convenient installation or removal of peripheral components, such as the optical disk
drive.
Description
Used for
Applies to
Cat. No.
Mounting brackets (2)
Machine or wall mounting
750R
6177R-M4AXP, 6177R-M4PXP,
6177R-M4SXP, 6177R-M4AS3RD
Rack handles (2)
Rack mounting
1450R
6177R-R4PXP, 6177R-R4SXP,
6177R-R4LXP, 6177R-R4AS3RD
Mounting brackets (2)
Machine or wall mounting
650R
6177R-M3PXP, 6177R-M3PXPDC,
6177R-M3AS3
ATTENTION: Use other cooling methods, if necessary, to maintain the product temperature at its
specified rating.