Rockwell Automation 1395 Digital DC Drive User Manual
Page 67
Publication 2361-5.01 July 1998
Chapter
6
Starting Up Your Drive
Contents
This chapter supplements the start-up procedures in the 1395 Digital
DC Drive User Manual with information for your high-horsepower
drive. The following information will be covered in this chapter:
Introduction
When you use publication 1395-5.40 to start up your drive, you will
need to refer to this chapter for information pertaining to the high-
horsepower drives.
Voltage Measurements
Table 6.A: Field AC Voltage Measurements
Table 6.B: 115V AC Voltage Measurements
Table 6.C: 24V DC Voltage Measurements
Topic
Page
Introduction
6-1
Voltage Measurements
6-1
Rated Armature and Field Currents
6-2
Feedback Scaling Parameters
6-2
Drive Rating
Field AC Input Measurement Points
1250, 1650, 3000A
TB8-1, TB8-3
Drive Rating
115V AC Measurement Points
1250, 1650, 3000A
TB5-3, TB5-12
Drive Rating
24V DC Measurement Points
1250, 1650, 3000A
TP1 (+24V DC) to TP7 (gnd) on power stage
interface board