Boss Audio Systems BV7320 User Manual
Page 11
7. To remove the front panel
1) Press the RELEASE button on the front panel to flip down the front panel
from the unit;(see fig. 1)
2) Flip down the front panel;(see fig. 2)
3) Hold the right end of the front panel and pull out the right end as arrow direc-
tion, then pull out the whole front panel as arrow direction.(see fig. 3)
8. To mount the front panel
1) Insert left end of the front panel first as arrow direction, then push and hook
up the right end of the front panel onto the unit;(see fig. 4)
2) Flip the front panel upward till hearing a clip.(see fig. 5 and fig. 6)
9. To turn on/off LOUD mode
Press the LOUD button on the remote control to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when
the bass is not enough.
10. To reset the unit
When the display is distorted or the function buttons are not working correctly
or sound
is distorted, press the RELEASE button to detach the front panel from the
unit, then use a needle object to press the RESET button to reset
the unit to original setting.
11.To adjust the sound equalizer curves
To adjust the sound equalizer curves, briefly and repeatedly press the SEL
button to select the sound equalizer curves of VOL, BAS(without preset EQ),
TRE (without preset EQ), BAL, FAD, then rotate the VOL knob on the front
panel or press the + or - button to adjust level.
Fig. 1
REL
Fig. 2
Fig. 3
Fig. 4
Fig . 5
Fig . 6
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
5
When playing a DVD disc, press the SUBTITLE button repeatedly to select
the language of the caption or turn off the caption.(depend on the current
disc)
When playing a VCD/MP3/WMA/CD disc , the button is not available.
5
1. When playing a DVD disc , press the AUDIO button repeatedly on the remote
control to select the desired language type. (depend on the current disc)
2. When playing a VCD disc, press the AUDIO button repeatedly to select the
sound mode of the MONO L, MONO R, MIX MONO and Stereo, no language
function.
3. When playing a CD/WMA/MP3 disc, the AUDIO button is disabled.
During playback of DVD/VCD disc, press the BAND(P/N) button on the front
panel or on the remote control repeatedly to change the VIDEO SIGNAL
SYSTEM mode.
5
time of the playing chapter,
the remained time of the playing chapter, the elapsed
the remained time of the playing title,
2. When playing a VCD/CD disc , press the OSD button repeatedly on the
remote control to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track, the
elapsted time of the disc, the remained time of the disc.
3. When playing a MP3/WMA disc, press the OSD button repeatedly on
the remote control to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track.
.10 Change the Caption Language
.11 Change the Audio Language
5.12 Change the Video Signal System
.13 Look over the Playback Status
1. When playing a DVD disc, press the OSD button repeatedly on the
remote control to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing title, the
serial number of the playing chapter, the elapsed
time of the playing title,
etc.
PDF created with FinePrint pdfFactory trial version