Boss Audio Systems BV7320 User Manual
Page 9
1.8 UNIT INSTALLATION
INSTALLATION INST RUCTIO NS
TO BOOST UP TH E CAPABILITY OF
ANTI-JAMMING, PLEASE FIX THE
METAL S TRAP ON THE METAL
CONNECTED TO THE CHASSIS OF
THE CAR.
METAL STRAP
DASH BOARD
SL IDING M ETAL HOUSING
TO DRAW THE CHASSIS OUT OF THE
SLIDING METAL HOUSING, INSERT
THE LEFT AND RIGHT KEY PLATES
INTO THE TWO SIDES OF CHASSIS.
FRONT PANEL
PLASTIC TRIM OUT
UNIT CHASSI S
SELECT THE PROPER TABS
OF THE SLIDING METAL
HOUSING TO FI X THE
SLIDING METAL HOUSIN G.
NOTE
REMOVE THE DECK TRANSPORT
SCREWS BEFORE INSTALLING IT.
TH E UN IT INSTALLATIO N IS ANTI - THEFT ON E. TH E UN IT
CHASSIS WE ARS A SL IDING METAL HO USING. F IRST LY
CO NNE CT THE PO WER LINES, SPEAKER LINES AND
AU TO A NTENNA A CCORDING TO MANUAL R EQUIREMENT,
TH EN I NSTALL TH E SL IDING METAL HOUSI NG IN A CAR
AC CORDING TO T HE DIAGRAM.
REMOVE THE SLIDIN G METAL HOUSIN G
EJ ECT BUTTON
RE SET BUTTON
3. During JPEG playback, press one of the >/</^/v buttons to change the angle of
viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During JPEG playback, press the PROG button to change the mode of refresh picture.
During JPEG playback, press the STOP button to stop playing and return to the root
menu.
*
During JPEG playback, the following buttons are not available: SLOW-FWD,
SUBTITLE, TITLE, ANGLE, STEP, AUDIO, RDM, INT and A-B.
*
In JPEG mode,the other operations are same as ones in MP3/WMA mode.
5
1. The root menu will display on the monitor when it begins to switch to DISC mode,
then it will automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER or file, then press the OK or PLAY button to open the FOLDER, or play the
selected file.
When displaying the root menu, you can also use the number buttons to select the
serial number of the file and play the file.
*
The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid in this mode.
*
The other functions are same as ones in DVD disc; but the RPT function is same as
one in MP3/WMA.
5
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the file name, folder name,
will be scrolling on the LCD display. As long as the
current playing
music contains relevant
tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display; otherwise,
they will not.
5
Power on the DVD player, then insert the USB storage or MMC/SD Card(first flip down
the front panel), and then the monitor will display the root menu of the USB storage or
MMC/SD Card.
All the operations a re same as ones of the corresponding format.
When you want to pull out the card, first push it, and then pull it out.
5
1. Press the SETUP button on the remote control to access the DVD System Menu on
the monitor.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select
a desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a
desired mode of the setup item, finally press the OK button to confirm it.
*
Press the < button to return to the upper level.
*
Press the SETUP button again or use the direction buttons to highlight the item of the
EXIT SETUP and then press the OK button to exit the System Menu.
.16 MP4 Operation
.17 ESP and
Function
songs title, artist and album
.18 USB and MMC/SD Reader Operation
.19 The DVD System Menu Setup Operation
ID3
MP3
ID3
PDF created with FinePrint pdfFactory trial version